φ10mm leading wires current transformer 2000:1
Structural parameters:
The main technical parameters
Model | ZMCT356 |
input current | 0-50A (sampling resistor 10Ω) |
Rated output current | 2.5mA at input 5A |
turns ratio | 2000:1 |
phase angle error | ≤20＇(input 5A，sampling resistor 10Ω) |
linear range | 0~50A(sampling resistor 10Ω) |
linearity | 0.2%（5%dot~120%dot） |
Ratio error | -0.5%≤f≤+0.5%(input 5A，sampling resistor 10Ω) |
isolation voltage | 3000V |
application | measurement |
Encapsulation | Epoxy |
installation | Output leads installation |
operating temperature | -40℃~+85℃ |
Instruction
Figure Ⅰ FigureⅡ
1. ZMCT356 used for the measurement, the typical usage is shown in Figure Ⅰand Figure Ⅱ. R is a sampling resistor.
Material list
NO. | Material | Spec, model | UL code | SGS |
1 | Ultracrystallite core | Ø14*19*5 | —— | yes |
2 | Enameled wire (Winding wire) | 2UEW Ø0.08，2000T | E258243 | yes |
3 | Tape | Flame retardant, Environmentalprotection, 5mm | E328315 | yes |
4 | Fills and seals material | TXH-9201 epoxy resin insulating compound | E196959 | yes |
5 | Outer covering |
Environmental protection | E59481 | yes |
6 | Leading wires | 1007-26#,0.12mm | E315651 | yes |