2mA/2mA Voltage Transformer
Structure parameters
ZMPT101C
Current-type Voltage Transformer
Small size，high accuracy，good consistency，for voltage and power measurement
Structural parameters：
Remarks:
primary input: 1、2 pins secondary output: 3、4pins
Or
primary input:: 3、4 pins secondary output::1、2pins
The main technical parameters
Model | ZMPT101C |
Rated input current | 2mA |
Rated output current | 2mA |
turns ratio | 1000:1000 |
phase angle error | ≤20＇（input 2mA，sampling resistor 100Ω） |
linear range | 0~1000V 0~10mA（sampling resistor 100Ω） |
linearity | ≤0.2%(20%dot~120%dot) |
Permissible error | -0.3%≤ f ≤+0.2%（input 2mA，sampling resistor 100Ω） |
isolation voltage | 4000V |
application | voltage and power measurement |
Encapsulation | Epoxy |
installation | PCB mounting（Pin Length>3mm） |
Operating temperature | -40℃~+60℃ |
CASE Material | ABS (Note: ABS Shell is not available for wave soldering) |
Direction for use
Figure Ⅰ FigureⅡ
1. The typical usage of the product is for the active output (FigureⅠ). R＇is a limiting resistor，R is a sampling resistor.
2. The product can be directly through the resistance sampling , easy to use ( FigureⅡ).