PCB mounting current transformer 2000:1
Structural parameters
ZMCT115M Current Transformer
Small size，high accuracy，good consistency，for accurate current and power measurement
Structural parameters：
Thick needle: input，fine needle: output
Front view Bottom view
The main technical parameters
Model | ZMCT115M（homonymous ends diagonal） |
Rated input current | 5A |
Rated output current | 2.5mA |
turns ratio | 2000:1 |
phase angle error | ≤15＇（input 5A，sampling resistor 100Ω） |
linear range | 0~20A（sampling resistor 100Ω） |
linearity | ≤0.2%（5%dot~120%dot） |
Permissible error | -0.2%≤ f ≤+0.2%（input 5A，sampling resistor 100Ω） |
isolation voltage | 3000V |
application | Precise current and power measurement |
Encapsulation | Epoxy |
installation | PCB mounting （pin length>3mm） |
operating temperature | -40℃~+60℃ |
Shell material | ABS (Note: ABS shell is not available for wave soldering) |
Direction for use
Figure Ⅰ Figure Ⅱ
1. The typical usage of the product is for the active output ( FigureⅠ ) . R is a sampling resistor.
2. The product can be directly through the resistance sampling , easy to use (figureⅡ).